$30.95
ONE RCA cable & PC board combo with standard ground wire, with upgraded RCA plugs (enough for 1 turntable)
Up for sale is a set of an upgraded version of our PC board and RCA cable combo that mounts inside the Technics 1200 series turntables, it is a brand new printed circuit board with the cable and ground wire attached. The cable is oxygen free copper wire and is approximately 4.5ft in length.
This upgraded item features our custom RCA plugs with gold tips. Cable is the perfect thickness (outer diameter 4mm) without being too big. It fits nicely in your clamper and retains the use of your spacer. Some folks will sell you too thick of a cable that forces you to remove the spacer, which is not a good thing.
We do not sell them at 6ft length because let's face it, you'll never have your turntable six feet from your Serato or Traktor or your mixer, so that additional length is a waste and translates to signal loss.
All you need to do is remove/desolder the old Pc board and tonearm wires & ground, and solder them to the new pc board, and you have an instantly upgraded turntable that is more convenient for you to hook up to your mixers and/or serato interface box to install this, you will need basic tools such as phillips head screwdriver, wire cutters, precision (mini) screwdrivers and of course a soldering iron and solder.
You should have a basic knowledge of how to solder if buying this item. This piece can be used as an OEM replacement for a broken board or as a convenient upgrade for your technics turntable. The item is pre-soldered but you will need to solder the internal wires.
We have been doing turntable repair work for 20+ years now and use these exact same cables in our shop on a daily basis. If you were near us, you'd have us work on your gear but this is our way of sharing our skill with the rest of the DJ community. In addition to turntable repairs, we are active nightclub and event DJs who have been involved with all aspects of the DJ world. A company by DJs for DJs...and our head tech is often referred to as "the guy who makes your favorite DJ sound so good."
Pc board is an upgraded version of technics part #s: SFDP182-01 or SFDP122-22.
RCA cable is an upgraded version of technics part: RJL2P009S12
this listing is for ONE pc board & cable combo set to install on ONE turntable so if you need more, please adjust your order amounts accordingly.
Includes basic instruction sheet
this replaces the technics factory parts: SFDP182-01 or SFDP122-22
Will work on the following turntables:
sl-1200, sl-1210 mk2, mk3, m3d, m5g, mk5 and any other 1200 series dj turntables
please note, this item does require you to solder. Soldering irons are hot and can burn you if you are not careful, so please let someone with a working knowledge of soldering and/or electronics install this for you.